Renovations are exciting, but they can go sideways fast. Most problems come from a few common mistakes: unclear plans, rushed decisions, and changes mid-job.
Here are the big ones—and what to do instead.
1) Starting without a clear scope
What it looks like:
“Let’s just start and we’ll decide as we go.”
Why it’s a problem:
If the plan keeps changing, the cost and timeline usually blow out.
Do this instead:
Write a simple scope list:
- what stays
- what gets replaced
- must-haves vs nice-to-haves
- your maximum budget limit
Even one page helps.
2) Choosing the cheapest quote without checking what’s included
What it looks like:
One quote is much lower, so you pick it.
Why it’s a problem:
Sometimes it’s cheaper because key items are missing (rubbish removal, waterproofing details, painting, patching, fittings).
Do this instead:
Compare quotes line by line. Look for:
- exact materials and brands (or clear allowances)
- what is excluded
- who pays for disposal and protection
- how variations (changes) are charged
3) Not having a written contract (or not reading it)
What it looks like:
Everything is agreed “over text” or verbally.
Why it’s a problem:
If there’s a dispute later, it gets messy fast.
Do this instead:
Get it in writing:
- scope
- payment stages
- start/finish expectations
- warranty/defects process
- what happens if products are out of stock
Australia has consumer protections, but paperwork still matters.
Source (general consumer rights): [3]
4) Underestimating lead times (tiles, cabinets, appliances)
What it looks like:
You order products after demolition starts.
Why it’s a problem:
Trades can’t finish without materials. Delays can leave you without a working kitchen or bathroom.
Do this instead:
Choose and order key items early:
- cabinets
- benchtops
- tiles
- appliances
- tapware
5) Changing your mind mid-job
What it looks like:
Switching tiles, moving a sink, changing lighting after rough-in.
Why it’s a problem:
Changes often mean rework. Rework costs money.
Do this instead:
Make the big decisions before work begins:
- layout
- electrical plan (lights and power points)
- plumbing locations
- tile set-out (how tiles line up)
6) Skipping proper waterproofing details in wet areas
What it looks like:
Rushing a bathroom or laundry and hoping it’ll be fine.
Why it’s a problem:
Water damage is expensive and stressful. Waterproofing is one of those things you can’t “see”, but you will definitely feel it later if it fails.
Do this instead:
Ask what waterproofing system is being used, and what checks happen before tiling. In Australia, wet-area work needs to meet building requirements under the National Construction Code framework.
Source: [4]
7) Not planning enough ventilation
What it looks like:
No decent exhaust fan in the bathroom, or weak rangehood in the kitchen.
Why it’s a problem:
Steam and cooking grease cause mould, peeling paint, and bad smells.
Do this instead:
Plan ventilation as part of the renovation, not an afterthought.
8) Forgetting about the “in-between” areas
What it looks like:
New kitchen looks great… but the old floor next to it looks terrible.
Why it’s a problem:
Kitchens and bathrooms connect to other spaces. The edges show.
Do this instead:
Check transitions:
- flooring height changes
- skirting boards
- paint lines
- door trims
- matching finishes
9) No contingency budget
What it looks like:
Budget is tight with no buffer.
Why it’s a problem:
Surprises happen in renovations—especially in older homes.
Do this instead:
Keep a buffer (often 10–15%) if possible, especially for full renos.
10) Ignoring asbestos risk in older homes
What it looks like:
Demolishing old sheeting without checking what it is.
Why it’s a problem:
Asbestos can be present in many Australian homes built before 1990, and it’s hazardous when disturbed.
Source: Safe Work Australia. [5]
Do this instead:
If your home is older, treat it seriously. Get advice/testing before demolition.
11) Poor communication during the build
What it looks like:
You don’t know what’s happening, and the builder doesn’t know what you want.
Why it’s a problem:
Small misunderstandings become expensive mistakes.
Do this instead:
Have a simple weekly check-in:
- what was done this week
- what’s next
- what decisions are needed from you
12) Not doing a proper handover checklist
What it looks like:
Job “finishes” but you haven’t checked details.
Why it’s a problem:
Tiny issues are easiest to fix straight away.
Do this instead:
Walk through and check:
- doors and drawers line up and close smoothly
- taps and drains don’t leak
- lights and power points work
- silicone lines are neat
- paint touch-ups are done
A quick “avoid mistakes” renovation checklist
Before you start, make sure you have:
- a written scope
- your selections chosen (or clearly allowed for)
- a realistic budget + buffer
- a simple timeline plan
- agreement on how changes are handled
- a final handover checklist
If you’d like help planning a renovation with fewer surprises, you can reach out to Kitchen Bathroom Renovate Service here: https://kitchenbathroomrenovate.com.au/
Lorem ipsum dolor sit amet, consectetur adipisicing elit. Laudantium eius, sunt porro corporis maiores ea, voluptatibus omnis maxime
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s,
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s,